Description
In the L10, source selection is via a high-quality switch located near to the input sockets. The chosen source is routed to a high quality motorized, film potentiometer and from there on to the audio circuit. This consists of a single ended triode stage loaded by a custom wound wide band output transformer which steps down the amplified signal allowing it to be coupled to the power amplifier at a manageable level and as a low impedance source. The output stage of the L10 is impervious to long interconnecting cables or lower impedance power amplifier input stages.
The L10 also incorporates an extremely sophisticated power supply to maintain constant operating conditions for the audio circuitry. It includes a valve rectifier, and a twin choke filtered LC stage which provides a stiff, voltage rail allowing the audio circuit to operate in a calm and orderly way regardless of the demands the music makes on the amplifying stage. Filament supplies are fully regulated to further reduce the potential for noise.
Puresound L10 amplifier specifications
- Freq Response……………………………………..-3 dB 7Hz-50KHz
- Signal to noise:…………………………………………………….>90dB
- Input sensitivity:……………………………640mV for 0dB output
- Input connections:…………….4 Line Level and one record in
- Output connections:………..2 Line Level and one record out
- Power consumption……………………………………………25Watts
- Line in impedance:………………………………………..100K Ohms
- Dimensions………………….W420 mm x D380 mm x H180 mm
- Weight……………………………………………………………………..17Kg
Price £2895.95